Project Description
Foam tape, Single sided foam Tape
Single Sided PE foam tape, coated adhesive to single side. It is made of a firm and closed cell PE foam that provide more rigidity. Therefore, more hard to recover to original shape after compression but great on weakening the effect of vibration.
Single Sided EVA foam tape, coated adhesive to single side. It is made of a resilient and closed cell EVA foam. Hence, has greater recovery characteristics after compression.
• Various thickness, fulfill any applicant requirements
• Excellent heat, water, UV, cold resistance tape
• Extremely flexible. For rough or irregular surfaces
• Excellent in shock absorption, insulation, cushioning, vibration and sound weakening.
• Excellent heat, water, UV, cold resistance tape
• Extremely flexible. For rough or irregular surfaces
• Excellent in shock absorption, insulation, cushioning, vibration and sound weakening.
• Used as gasket tape
• Suited as shock absorbing material for window and door sealing, as well as cushioning.
• Ideally for machinery plate, electronic appliance assembling, fitness equipments and others
• Widely used in photo framing, protection for fragile products, decoration.
• Suited as shock absorbing material for window and door sealing, as well as cushioning.
• Ideally for machinery plate, electronic appliance assembling, fitness equipments and others
• Widely used in photo framing, protection for fragile products, decoration.
• Jumbo roll: 1020mm x 300m
• Log roll: 1020mm x 50m, various lengths
• Slit rolls: various widths and lengths available
• Log roll: 1020mm x 50m, various lengths
• Slit rolls: various widths and lengths available
Properties
| Product No. | Carrier | Thickness (mm) |
Release paper liner | Release film liner |
|---|---|---|---|---|
| SP/EW | White PE/EVA foam | 0.5 1.0 1.5 2.0 3.0 5.0 Up to 10mm |
White paper Yellow paper |
Red film Green film Blue film |
| SP/EB | Black PE/EVA foam | |||
| SP/EG | Gray PE/EVA foam |
Remarks
• Measured by peeling in a 180° direction at a speed of 300 mm/min at 23℃/ 73°F with 0.025 mm / 0.98 mil PET lining.
• The listed figures are not guaranteed values but only examples of the measured values.